Reflow 1.7.1

Alarm Sounds

• Alarm consoles can now have sounds configured per class under the Alarms > Alarm Console > Alarm Sounds menu
• Each of the 11 sounds has been created or curated by our team to be pleasant yet attention grabbing in any environment
• Sounds will be played when the console refreshes and a new alarm record is transitioning into a fault, offnormal, or alert state

Dynamic Row Styles

• Find these options in Alarms > Alarm Console > Table Styles & Columns
• Alarm table rows can be styled based on source state (alert, fault, offnormal, normal) or acknowledgement status
• A color can be selected for each state/status and separate options for the row border, background, cell text, and action button can be toggled to use this color
• The icons that appear in the Ack State column for acked/unacked records can now be customized

Consoles can now be set to display the active alarms page by default

The Alarms configuration menus have been reorganized to accommodate the new features and options

Charts

• Multiple Y Axis Support
  • Charts now display Y-axes on both the left and the right side of charts when values with differing unit facets are displayed
  • The primary Y-axis (left) is chosen based on which history was added to the chart first, the second history added with a differing unit facet will set the secondary axis and all other histories with differing facets will add additional options to the secondary Y-axis
  • Y-axes can be swapped by clicking on the axis label
  • Hovering over a Y-axis label will isolate the histories associated with it in the chart
• Hovering over a legend item will isolate the corresponding history in the chart

History Index Page Group Filtering

• The filter menu now deselects child groups when a parent group is deselected
• While this new behavior feels better and makes more sense to end-users in the Reflow view, it will make it impossible to select parent groups without also selecting their children when using multiple tags in Niagara History Groupings. To account for this, a new Strict Group Picker option has been added to the Histories Index Page config. When enabled, this will return the group filter its pre-1.7.1 behavior.

Display names will now be shown instead of history names for remote histories that have a display name set

• The building map configuration options have been reorganized in the configuration menu
• Automatic counts for floors and devices on building cards and map popovers can be overridden in the new 'Device and Floor Counts' options

• Map Marker Styles are now available in the Building Index Page configuration
  • Marker styles allow you to set custom icons and colors for map markers; styles can be applied to buildings and groups
  • Building groups have a new 'Child Marker' style setting that allows you to set the default style of all markers for the group's children
  • The default options for map marker colors have been moved to the 'Default Marker Style' in the new Map Marker Styles menu in the Building Index Page
• Groups can now have map markers
  • Markers will zoom to the group and display a popover card when clicked; both options can be toggled off in the group's configuration
  • A group's children can be hidden on the map when the group's marker is visible; this can be restricted to specific zoom levels allowing you to take a cluster of buildings and display a single marker for only the group until the user zooms to the specified level

Devices can now be served by multiple devices. Up to two parent items will be shown in the device's title - when more than two served by parents are selected, a dropdown menu will appear instead

The Status Point property can now be set when remapping devices; a remap warning prompt will now appear when changing the Status Point of an Equipment Type on the Point Template

• The buildings that appear on this card can be filtered in the card configuration

• A new "None" option has been added for true and false actions. When this is selected the card will no longer be clickable by the user on the dashboard and will no longer display a pointer cursor
• A new "Require confirmation" option has been added to display a customizable confirmation modal before an action is ran when the card is clicked

• The styles for charts have been updated for these cards when they are used in a custom page with dark mode on

• Untitled/blank columns are now supported

• Room names now appear correctly on building equipment and floor plans when using a room slot that is in a containing folder on a device
• Custom room names for devices on the equipment index page now properly override the room name slot if it exists in the device
• Room names properly appear on device rows in equipment type summaries when viewed in table mode
• Fixed an issue where deleting an equipment group type could leave the devices in the configuration, counting against license limitations
• Point dropdown lists that appear when mapping Niagara points to Reflow device points are searchable again
• Title content on device graphic pages now properly wraps above an embedded Niagara view instead of being cut off

• Alarm Display Cards no longer retain references to deleted Alarm Consoles
• Gauge cards no longer display zero values incorrectly when the lower limit is not zero
• Niagara Point cards with a height of 'half' no longer stretch inverted titles to the full width of the card

• Enum and Boolean style text will now center based on the visible width of the bar instead of the total width. This makes it easier to see the data when zooming into enums/Boolean charts
• History dashboard cards and featured histories now properly carry custom colors over to chart pages
• History names now display properly when choosing custom colors on history dashboard cards and featured histories
• Boolean and Enum charts no longer appear to show data for future times in the range
• History charts linked to from the Hyperlink Picker will now properly load
• Fixed an issue where duplicate custom colors would cause charts to revert to default colors
• Custom colors on History Chart Cards with comparison data now display correctly
• Contextual Ranges - this data will now always appear as shaded diagonal lines when filled

• Updated configuration menu badge text for Buildings > Building > Histories to include the count of histories when filter by source is selected
• The building status indicator now properly appears in building sub navigations on desktop/tablet
• Groups no longer display as disabled buildings in the Building Markers list of the Building Index Page configuration

• The Schedules Index Page in the Reflow View will no longer appear blank if the Reflow Config View has never been opened

• The Source column on the Alarm Sources table will properly hide when toggled off
• User interface elements in the sources table now respond properly when the most recent record for a source has been acknowledged

• Fixed an issue that was preventing size and position properties from appearing when multiple elements were selected

• Custom pages with links to other custom pages that have been deleted no longer appear blank due to permissions checks
• Fixed a bug in custom global navigation options for user profiles where a "Delete Subnavigation" button was improperly appearing